Assembly Order Picking with Two Robots on a 13 Metre Traversing Axis
Ulrich Rotte
Ulrich Rotte Anlagenbau und Fördertechnik GmbH from Germany boasts a 30-year legacy, originating from a former petrol station and evolving into a versatile builder of specialized facilities in automation technology. With over 80 employees at its Salzkotten headquarters and an annual turnover nearing 10 million euros, the company prioritizes in-house knowledge and experience. Their forte lies in tailored solutions for clients, particularly in fully automated production facilities and robotics.
Driving Community
One of Ulrich Rotte’s showcase projects involved assembling gate controls for the door and gate specialists Hörmann, incorporating manual and automated processes for both current and legacy products. Robots, guided by a 3D Vision System, handle order picking and assembly, ensuring precise operations without compromising safety. Ulrich Rotte developed and built customised grabbers for the different tasks that the robots are taking care of.
Two FANUC M-710𝑖C/45M robots at Hörmann’s Salzkotten factory take parts from prepared large load carriers from a total of 14 spaces. They are then laid on workpiece carriers. Handling reusable packaging and preparing it to ensure it can be returned is also part of the task. It is possible to select manual or automated supply and disposal of order picking.
14 places means that the robots have long paths. Therefore, both FANUC robots have been assembled on a 13 metre long linear axis. Robot 1 approaches spaces 1 to 7, robot 2 approaches spaces 8 to 14. So long as the robots do not travel beyond their respective borders, “Dual Check Safety” (DCS) software offers sufficient protection. Another safety option from FANUC, “Interference Check”, prevents the robots from colliding with one another in dynamic operation.
A 3D Vision System delivers the position information required for grabbing and also determines information on the fill level of the respective load carrier. Project manager Daniel Bürgermeister reports: “It is significantly easier to work with a system in which CAD models are stored instead of defining image features which have to be checked each time. I’m not a programmer, and I was able to operate it within a few minutes.”
The workpiece carrier with all the parts required for the assembly take the product through the entire assembly process. A final inspection at the automated test station is supported by two type LR Mate 200𝑖D robots that simulate different operating procedures.
After passing the test, controls move to Hörmann’s storage facility for final assembly. Since range is important for this task, a long-arm M-20𝑖A/12L FANUC robot applies lids and type plates, verified by image recognition. If approved, controls are placed in a load carrier and moved by a Rotte conveyor.
Daniel Bürgermeister
Project Manager Ulrich Rotte Anlagenbau und Fördertechnik
All facilities feature visual management units for manual or automatic operation. In automatic operation, facility management is connected to the Hörmann central production management.
Get Inspired
Kahve Öğütücülerin Tam Otomatik Montajı
Kahve değirmeni gibi popüler ev aletlerinin üretiminde, üretim başarısını belirleyen bir dizi ön koşul vardır. Örneğin, yalnızca açık bir şekilde yapılandırılmış, verimli ve hedef odaklı süreçler, gerekli üretim güvenilirliği düzeylerini sağlayabilir. Pazar lideri Eugster/Frismag AG, 14 FANUC LR Mate endüstriyel robot ve FANUC ZDT (Zero Down Time) kullanmaya başladıktan sonra, bu hedefe ulaşmanın çok daha gerçekçi hale geldiğini doğrulamıştır. Bu robotlar, artık her 7 saniyede bir kahve değirmeni montajını kesintisiz ve otomatik olarak gerçekleştirmektedir.
Kozmetik Üreticisi FANUC Otomasyonunun Güzelliğini Keşfediyor
Türkiye'deki Erkul Cosmetics, çeşitli yüksek performanslı FANUC otomasyon ürünlerinin sağladığı sayısız kalite ve verimlilik avantajından yararlanmaktadır. Hızla büyüyen bu kozmetik şirketi, FANUC çözümlerinin sağladığı rekabet avantajlarıyla desteklenerek sektöründe üretim için bir referans noktası olmayı hedeflemektedir.
FANUC Case Studies
Explore our comprehensive range of factory automation solutions, showcased in detailed case studies, and designed to optimise and streamline any manufacturing process.
Malzeme Taşıma
